Thanks to the electronic invisible fence, your dog will very quickly learn to respect the boundaries of a defined space and will only move freely in places where there is no danger to him.

THE UNCOMPETITIVE ADVANTAGE OF THIS MODEL is its BACK-UP BATTERY , which ensures safe operation of the device for up to 16 hours in the event of a power outage.

The electronic invisible fence d-fence 202/2002 consists of a transmitter generator with a backup battery, a receiver and an antenna, here it is a simple insulated wire. The transmitter generator generates a signal to the antenna wire, with which you can delimit the selected area with a warning and correction zone. The receiver attached to the dog's collar detects the signal spreading from the installed antenna wire; if the dog crosses the boundary of the first (warning) zone, the receiver starts to emit an intermittent sound signal. If the dog does not respond to the sound warning and crosses the boundary of the second (correction) zone, the receiver simultaneously emits a sound signal and a stimulation pulse. The intensity of the stimulation pulse, as well as the width of the correction and warning zones, can be easily adjusted. The number of dogs with a receiver attached to the collar is not limited.

The collar is compact, 100% waterproof and, due to its low weight and ergonomic design, can be used for all dog breeds.

The electronic systems of the generator and collar use modern technology based on single-chip microprocessors. The device is suitable for any type of terrain and can be installed very easily using common tools. For the invisible fence system to work, the wire must be connected to the transmitter and form an uninterrupted loop of wire (avoid damaging it). From the transmitter, you unroll the wire around your property. The wire can be placed on the ground, shallowly buried (max. 10 cm deep) or attached to an existing fence or wall (in this case, up to a maximum height of 30 cm above the ground). The standard package contains 100 m of antenna wire. If you need more than 100 m, you can purchase an additional package from us and then connect the wire using notch connectors (notch connectors are included in the basic package). If you want your dog to be able to freely walk through a certain area on your property where you have to run a wire, you wind the outgoing wire around the incoming one. Twisting the wires around each other disrupts the emitted waves and the dog can move freely through this area. The voltage in the antenna does not exceed 12 V, so there is no danger even if the wire is interrupted. For better orientation, it is possible to mark the defined area with targets.

Installation length and recommended wire cross-section:

up to 400 m - 0.75 mm2

400m - 600m - 1.0mm2

600m - 900m - 1.5mm2

900m - 2200m - 2.5mm2

We guarantee the correct functioning of the installation only when purchasing a suitable wire cross-section (depending on the size of the plot).

The device has the ability to adjust the generator for short or long antenna wire installation.

d-fence 202/2002-2nd generation allows switching of the generator power, which is generated into the antenna wire. This function allows fine adjustment of the warning and correction zone for short installations (up to 400 m of antenna wire) and at the same time for long installations (over 400 m of antenna wire). A newly purchased generator is preset from the factory for installation up to 400 m. If your installation is longer, an adjustment is required.

Advantages of the invisible d-fence fence:

• very simple and quick installation (the fence can be functional within 1 hour)
• cheap and very variable option for fencing the land - if necessary, you can change the fencing in a moment according to current requirements (pool boundary,
• flower beds, rockeries, entrance doors to the house, etc.)
• The fence is "invisible", meaning it does not obstruct your view of the surroundings or aesthetically disrupt the garden.
• can supplement an existing fence that the dog still overcomes (jumps over, digs under, gnaws through, etc.)
• You can keep any number of dogs in a designated area.
• The 9.6V backup battery, which serves as a backup source in the event of a power outage, is capable of supplying voltage to the transmitter generator for up to 16 hours.

Broadcast generator

• 1st band (warning): continuously adjustable between 0 and 15 meters (depending on model and length of antenna wire)
• 2nd band (correction): continuously adjustable between 0 and 15 meters (depending on model and length of antenna wire)
• wire: low-impedance copper insulated 0.75 to 2.5 mm2, length max. 2200 meters
• power supply: adapter 230 V / 50 Hz, 15 V / 300 mA
• Bounded area: maximum 30 ha (with square installation)

Collar

• Battery life: 6 months in standby mode
• adjustable neck circumference: approx. 18 to 72 centimeters
• working temperature -10 to 50 degrees Celsius
• 100% waterproof, protected against immersion in water
• The intensity of the stimulation pulse can be adjusted on the collar in 8 levels
• The ISIT function allows you to detect the occurrence and intensity of interfering signals in places where you plan to install the antenna wire and thus prevent possible problems with the proper functioning of the d-fence device in advance.

Package includes:

• broadcast generator
• receiver with woven strap
• 2 pcs of contact points 12 mm and 2 pcs of 17 mm
• CR2 3V lithium battery
• 9.6 V backup battery
• magnet with lanyard
• power adapter
• test glow plug
• antenna connector
• slotted connectors for connecting wires 2 pcs
• plastic dowels for fixing the transmitter generator to the wall 2 pcs.
• screws for fixing the transmitter generator to the wall 2 pcs
• instructions and warranty card